| |Viewdraw initialization file for Version 5.0 | | (c) Copyright 1985, 1992 Viewlogic Systems, Inc. | | | Set the default display characteristics for each object | | | Colors | ------------------------------------------------------------------ | | 0 Black | 4 Red | 8 Gray | 12 Lt. Red | 1 Blue | 5 Magenta | 9 Lt. Blue | 13 Lt. Magenta | 2 Green | 6 Brown | 10 Lt. Green | 14 Yellow | 3 Cyan | 7 Lt. Gray | 11 Lt. Cyan | 15 White | | | Fillstyles: | ------------------------------------------------------------------ | | 0 Hollow | 1 Solid | | | Object Color Fillstyle Linestyle | or Font | ------ ----- --------- --------- | NET 4 1 0 COMPONENT 15 0 0 ATTRIBUTE 14 0 0 LABEL 15 0 0 PIN 3 0 0 BOX 2 0 0 LINE 2 0 0 CIRCLE 2 0 0 ARC 2 0 0 TEXT 10 0 0 | | set the display characteristics for the selection layer | SELECTION_LAYER 15 0 0 | | set the display characteristics for the border layer | BORDER_LAYER 15 0 0 | | set the display characteristics for the value layer | VALUE_LAYER 7 0 0 | | set the display characteristics for the annotation layer | ANNO_LAYER 7 0 0 | | Default values | GRID 10 | Grid spacing (units) DOTSIZE 5 | Solder dot radius (units) BUS_DOTSIZE 12 | Bus solder dot radius (units) BOXSIZE 5 | Dangling joint box width (units) TEXTSIZE 10 | Text size (units) TEXTORIGIN 3 | Text origin BUSWIDTH 4 | Bus half-width (units) BUBBLESIZE 5 | Bubble size on pins (units) AUTOLOG 10 | Autolog value (number of Viewdraw commands to | hold before writing to log file) SDISTANCE 10 | Selection distance (units) ADISTANCE 20 | Avoidance distance (units) SHEETSIZE 1 | Sheet size. | 0 = ASIZE, 1 = BSIZE, 2 = CSIZE, 3 = DSIZE, | 4 = ESIZE, 5 = A4, 6 = A3, 7 = A2, | 8 = A1, 9 = A0 | 10 = ZSIZE (requires width and height) | Ex: SHEETSIZE 10 200 200 ROUTE 2 | Net routing. | 0 = Straight, 1 = Orthogonal, 2 = Avoidance SCOPE 0 | Scope for labels 0 = Local, 1 = Global TEXT_THRESHOLD 3 | Threshold (units) NEW_ATTR_VIS 1 | New attribute and value visibility | 1 = Name and value visible, | 2 = Name only visible | 3 = Value only visible BLOCKTYPE 0 | Default block type | 0 = Composite, 1 = Module, 2 = annotate, 3 = pin UNDO 16 | number of commands to undo ** Changed at 5.0 ** | | Default modes. (1 = On or Yes; 0 = Off or No.) | GRIDON 1 | Grid display. BORDERON 1 | Border display. HEADERON 1 | Header display. COMPTEXTON 1 | Component text, labels and attributes. TEXTON 1 | Text. ATTRON 1 | Attributes LABELON 1 | labels DETAIL 1 | detail ** Changed at 5.0 ** SNAPTOPIN 1 | snap to pin UNIQUE_LABEL 0 | create unique labels on copy VALUESON 1 | display simulation values (or generic b/a) CONTEXT_WINDOW 0 | display context window ** Changed at 5.0 ** NAMESON 0 | display internal names SORTON 1 | alphabetically sort dialog entries PNUMSON 1 | display pin numbers RNUMSON 1 | display refdes DEFSHEET 0 | search for sheet template for new sheets XTRAERRS 1 | print out all errors in checker DBOXON 0 | pick names from dialog boxes NETNAME VDD | Upon creation, VDD will have global scope. NETNAME GND | Upon creation, GND will have global scope. |SYMBOL_QUALIFIERS \D | Demorgan |SYMBOL_QUALIFIERS \C | Conventional |SYMBOL_QUALIFIERS \A | Ansi |SYMBOL_QUALIFIERS \P | Package ATTR_RESET SS#1 | Never copy this SCICARD attribute ATTR_RESET SS#2 | Never copy this SCICARD attribute ATTR_RESET REFDES SYMBOL_VALUE | Reset REFDES attribute value from symbol | |5.0 ATTR_PROMOTE |5.0 COARSE_GRID 0 |5.0 DYNAMIC_XY 0 |5.0 BEGIN_NETS_IN_SPACE 0 |5.0 OATS 0 | Design Directories | ------------------ | | Format: DIR [DirType(s)] DirPath (LibName) | | DirType: p or pw - primary / writable | w - writable (read/write) | r - read-only | m or rm - read-only megafile | | DirPath: directory specification | | LibName: library name aka library alias or VHDL library name (optional) | 32 characters or less. Must begin with a letter. | | examples: | | DIR [p] . | DIR [r] /workview/wvlibs/74ls (vl74ls) | DIR [r] /workview/wvlibs/builtin (builtin) | DIR [w] under/development/alu (newalu) | | | NOTICE!!!! You may not have more than 23 libraries active at a time. | | If you have 24 or more libraries, you get two problems: | 1. The FIRST time you save a viewdraw schematic viewdraw dies with | vllib: Fatal 1310: in call to routine vlDufBIDIsValid Later saves work fine. | 2. Running "vsm" on a schematic can result in: | Error - Could not find WIR file vl74ls:74ls04.1. | 3. Libraries 24 on will not list components to add | | The default viewdraw.ini at Duke has 23 active libraries. | DIR [pw] . | | New XILINX Libraries | DIR [r] /opt/digital/share/xilinx3/workview/shm4000 (shm4000) DIR [r] /opt/digital/share/xilinx3/workview/unified/xbuiltin (xbuiltin) DIR [r] /opt/digital/share/xilinx3/workview/unified/xblox (xblox) DIR [r] /opt/digital/share/xilinx3/workview/unified/xc3000 (xc3000) DIR [r] /opt/digital/share/xilinx3/workview/unified/xc3000o (xc3000o) DIR [r] /opt/digital/share/xilinx3/workview/unified/xc4000 (xc4000) DIR [r] /opt/digital/share/xilinx3/workview/unified/xc4000o (xc4000o) DIR [r] /opt/digital/share/xilinx3/workview/unified/builtin (builtin) | | Other Viewlogic Libraries | DIR [m] /opt/digital/share/powerview/simmods/vl/dip/74ls (vl74ls) DIR [m] /opt/digital/share/powerview/simmods/vl/dip/74f (vl74f) DIR [m] /opt/digital/share/powerview/simmods/vl/dip/74als (vl74als) DIR [m] /opt/digital/share/powerview/lib/dio (dio) DIR [m] /opt/digital/share/powerview/lib/builtin (builtin) |DIR [m] /opt/digital/share/powerview/simmods/amodels (amodels) |DIR [m] /opt/digital/share/powerview/simmods/dram (dram) |DIR [m] /opt/digital/share/powerview/simmods/extended (extended) |DIR [m] /opt/digital/share/powerview/simmods/hmixlib (hmixlib) |DIR [m] /opt/digital/share/powerview/simmods/mixlib (mixlib) |DIR [m] /opt/digital/share/powerview/lib/anlgdev (anlgdev) |DIR [m] /opt/digital/share/powerview/lib/misc (misc) |DIR [m] /opt/digital/share/powerview/lib/op_com (op_com) |DIR [m] /opt/digital/share/powerview/lib/resist (resist) |DIR [m] /opt/digital/share/powerview/lib/switch (switch) |DIR [r] /opt/digital/share/powerview/lib/xstd (xstd) | | The following are symbols sets. They have no simulation capability | Remove the | if you are interested in using them for your designs | |DIR [m] /opt/digital/share/powerview/symsets/adc (adc) |DIR [m] /opt/digital/share/powerview/symsets/amd (amd) |DIR [m] /opt/digital/share/powerview/symsets/analog (analog) |DIR [m] /opt/digital/share/powerview/symsets/dac (dac) |DIR [m] /opt/digital/share/powerview/symsets/dram (dram) |DIR [m] /opt/digital/share/powerview/symsets/intel (intel) |DIR [m] /opt/digital/share/powerview/symsets/memory (memory) |DIR [m] /opt/digital/share/powerview/symsets/micro (micro) |DIR [m] /opt/digital/share/powerview/symsets/tipld (tipld)