|
|Viewdraw initialization file for Version 5.0
|
| (c) Copyright 1985, 1992 Viewlogic Systems, Inc.
|
|
| Set the default display characteristics for each object
|
|
| Colors
| ------------------------------------------------------------------
|
| 0 Black | 4 Red | 8 Gray | 12 Lt. Red
| 1 Blue | 5 Magenta | 9 Lt. Blue | 13 Lt. Magenta
| 2 Green | 6 Brown | 10 Lt. Green | 14 Yellow
| 3 Cyan | 7 Lt. Gray | 11 Lt. Cyan | 15 White
|
|
| Fillstyles:
| ------------------------------------------------------------------
|
| 0 Hollow | 1 Solid
|
|
| Object Color Fillstyle Linestyle
| or Font
| ------ ----- --------- ---------
|
NET 4 1 0
COMPONENT 15 0 0
ATTRIBUTE 14 0 0
LABEL 15 0 0
PIN 3 0 0
BOX 2 0 0
LINE 2 0 0
CIRCLE 2 0 0
ARC 2 0 0
TEXT 10 0 0
|
| set the display characteristics for the selection layer
|
SELECTION_LAYER 15 0 0
|
| set the display characteristics for the border layer
|
BORDER_LAYER 15 0 0
|
| set the display characteristics for the value layer
|
VALUE_LAYER 7 0 0
|
| set the display characteristics for the annotation layer
|
ANNO_LAYER 7 0 0
|
| Default values
|
GRID 10 | Grid spacing (units)
DOTSIZE 5 | Solder dot radius (units)
BUS_DOTSIZE 12 | Bus solder dot radius (units)
BOXSIZE 5 | Dangling joint box width (units)
TEXTSIZE 10 | Text size (units)
TEXTORIGIN 3 | Text origin
BUSWIDTH 4 | Bus half-width (units)
BUBBLESIZE 5 | Bubble size on pins (units)
AUTOLOG 10 | Autolog value (number of Viewdraw commands to
| hold before writing to log file)
SDISTANCE 10 | Selection distance (units)
ADISTANCE 20 | Avoidance distance (units)
SHEETSIZE 1 | Sheet size.
| 0 = ASIZE, 1 = BSIZE, 2 = CSIZE, 3 = DSIZE,
| 4 = ESIZE, 5 = A4, 6 = A3, 7 = A2,
| 8 = A1, 9 = A0
| 10 = ZSIZE (requires width and height)
| Ex: SHEETSIZE 10 200 200
ROUTE 2 | Net routing.
| 0 = Straight, 1 = Orthogonal, 2 = Avoidance
SCOPE 0 | Scope for labels 0 = Local, 1 = Global
TEXT_THRESHOLD 3 | Threshold (units)
NEW_ATTR_VIS 1 | New attribute and value visibility
| 1 = Name and value visible,
| 2 = Name only visible
| 3 = Value only visible
BLOCKTYPE 0 | Default block type
| 0 = Composite, 1 = Module, 2 = annotate, 3 = pin
UNDO 16 | number of commands to undo ** Changed at 5.0 **
|
| Default modes. (1 = On or Yes; 0 = Off or No.)
|
GRIDON 1 | Grid display.
BORDERON 1 | Border display.
HEADERON 1 | Header display.
COMPTEXTON 1 | Component text, labels and attributes.
TEXTON 1 | Text.
ATTRON 1 | Attributes
LABELON 1 | labels
DETAIL 1 | detail ** Changed at 5.0 **
SNAPTOPIN 1 | snap to pin
UNIQUE_LABEL 0 | create unique labels on copy
VALUESON 1 | display simulation values (or generic b/a)
CONTEXT_WINDOW 0 | display context window ** Changed at 5.0 **
NAMESON 0 | display internal names
SORTON 1 | alphabetically sort dialog entries
PNUMSON 1 | display pin numbers
RNUMSON 1 | display refdes
DEFSHEET 0 | search for sheet template for new sheets
XTRAERRS 1 | print out all errors in checker
DBOXON 0 | pick names from dialog boxes
NETNAME VDD | Upon creation, VDD will have global scope.
NETNAME GND | Upon creation, GND will have global scope.
|SYMBOL_QUALIFIERS \D | Demorgan
|SYMBOL_QUALIFIERS \C | Conventional
|SYMBOL_QUALIFIERS \A | Ansi
|SYMBOL_QUALIFIERS \P | Package
ATTR_RESET SS#1 | Never copy this SCICARD attribute
ATTR_RESET SS#2 | Never copy this SCICARD attribute
ATTR_RESET REFDES SYMBOL_VALUE | Reset REFDES attribute value from symbol
| |5.0 ATTR_PROMOTE
|5.0 COARSE_GRID 0
|5.0 DYNAMIC_XY 0
|5.0 BEGIN_NETS_IN_SPACE 0
|5.0 OATS 0
| Design Directories
| ------------------
|
| Format: DIR [DirType(s)] DirPath (LibName)
|
| DirType: p or pw - primary / writable
| w - writable (read/write)
| r - read-only
| m or rm - read-only megafile
|
| DirPath: directory specification
|
| LibName: library name aka library alias or VHDL library name (optional)
| 32 characters or less. Must begin with a letter.
|
| examples:
|
| DIR [p] .
| DIR [r] /workview/wvlibs/74ls (vl74ls)
| DIR [r] /workview/wvlibs/builtin (builtin)
| DIR [w] under/development/alu (newalu)
|
|
| NOTICE!!!! You may not have more than 23 libraries active at a time.
|
| If you have 24 or more libraries, you get two problems:
| 1. The FIRST time you save a viewdraw schematic viewdraw dies with
| vllib: Fatal 1310: in call to routine vlDufBIDIsValid Later saves work fine.
| 2. Running "vsm" on a schematic can result in:
| Error - Could not find WIR file vl74ls:74ls04.1.
| 3. Libraries 24 on will not list components to add
|
| The default viewdraw.ini at Duke has 23 active libraries.
|
DIR [pw] .
|
| New XILINX Libraries
|
DIR [r] /opt/digital/share/xilinx3/workview/shm4000 (shm4000)
DIR [r] /opt/digital/share/xilinx3/workview/unified/xbuiltin (xbuiltin)
DIR [r] /opt/digital/share/xilinx3/workview/unified/xblox (xblox)
DIR [r] /opt/digital/share/xilinx3/workview/unified/xc3000 (xc3000)
DIR [r] /opt/digital/share/xilinx3/workview/unified/xc3000o (xc3000o)
DIR [r] /opt/digital/share/xilinx3/workview/unified/xc4000 (xc4000)
DIR [r] /opt/digital/share/xilinx3/workview/unified/xc4000o (xc4000o)
DIR [r] /opt/digital/share/xilinx3/workview/unified/builtin (builtin)
|
| Other Viewlogic Libraries
|
DIR [m] /opt/digital/share/powerview/simmods/vl/dip/74ls (vl74ls)
DIR [m] /opt/digital/share/powerview/simmods/vl/dip/74f (vl74f)
DIR [m] /opt/digital/share/powerview/simmods/vl/dip/74als (vl74als)
DIR [m] /opt/digital/share/powerview/lib/dio (dio)
DIR [m] /opt/digital/share/powerview/lib/builtin (builtin)
|DIR [m] /opt/digital/share/powerview/simmods/amodels (amodels)
|DIR [m] /opt/digital/share/powerview/simmods/dram (dram)
|DIR [m] /opt/digital/share/powerview/simmods/extended (extended)
|DIR [m] /opt/digital/share/powerview/simmods/hmixlib (hmixlib)
|DIR [m] /opt/digital/share/powerview/simmods/mixlib (mixlib)
|DIR [m] /opt/digital/share/powerview/lib/anlgdev (anlgdev)
|DIR [m] /opt/digital/share/powerview/lib/misc (misc)
|DIR [m] /opt/digital/share/powerview/lib/op_com (op_com)
|DIR [m] /opt/digital/share/powerview/lib/resist (resist)
|DIR [m] /opt/digital/share/powerview/lib/switch (switch)
|DIR [r] /opt/digital/share/powerview/lib/xstd (xstd)
|
| The following are symbols sets. They have no simulation capability
| Remove the | if you are interested in using them for your designs
|
|DIR [m] /opt/digital/share/powerview/symsets/adc (adc)
|DIR [m] /opt/digital/share/powerview/symsets/amd (amd)
|DIR [m] /opt/digital/share/powerview/symsets/analog (analog)
|DIR [m] /opt/digital/share/powerview/symsets/dac (dac)
|DIR [m] /opt/digital/share/powerview/symsets/dram (dram)
|DIR [m] /opt/digital/share/powerview/symsets/intel (intel)
|DIR [m] /opt/digital/share/powerview/symsets/memory (memory)
|DIR [m] /opt/digital/share/powerview/symsets/micro (micro)
|DIR [m] /opt/digital/share/powerview/symsets/tipld (tipld)
<div align="center"><br /><script type="text/javascript"><!--
google_ad_client = "pub-7293844627074885";
//468x60, Created at 07. 11. 25
google_ad_slot = "8619794253";
google_ad_width = 468;
google_ad_height = 60;
//--></script>
<script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
</script><br /> </div>