| CAUSE: | You turned on the Power-Up High option for both the specified pin and its register. However, these options conflict with each other due to an inversion between the pin and the register. The Logic Synthesizer is overriding the option on the pin with the option on the register. |
| ACTION: | If you want the Power-Up High option on the register to override the Power-Up High option on the pin, no action is required. Otherwise, remove any inversion between the pin and register that could affect power-up. |
See also:
|
- PLDWorld - |
|
|
| Created by chm2web html help conversion utility. |